DESCRIPTION

SPECIFICATIONS

*Power will vary depending on the SDRAM used.

HX430C15PB3K4/64

64GB (16GB 2G x 64-Bit x 4 pcs.)

DDR4-3000 CL15 288-Pin DIMM

Continued >>

FEATURES

HyperX HX430C15PB3K4/64 is a kit of four 2G x 64-bit (16GB)

DDR4-3000 CL15 SDRAM (Synchronous DRAM) 2Rx8,

memory module, based on sixteen 1G x 8-bit FBGA

components per module. Each module kit supports Intel®

Extreme Memory Profiles (Intel® XMP) 2.0. Total kit

capacity is 64GB. Each module has been tested to run at

DDR4-3000 at a low latency timing of 15-17-17 at 1.35V. The

SPDs are programmed to JEDEC standard latency

DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin

DIMM uses gold contact fingers. The JEDEC standard

electrical and mechanical specifications are as follows:

CL(IDD)

Row Cycle Time (tRCmin)

Refresh to Active/Refresh

Command Time (tRFCmin)

Row Active Time (tRASmin)

Maximum Operating Power

UL Rating

Operating Temperature

Storage Temperature

17 cycles

45.75ns(min.)

350ns(min.)

32ns(min.)

TBD W*

94 V - 0

0o

 C to +85o

 C

-55o

 C to +100o

 C

XMP TIMING PARAMETERS

•JEDEC: DDR4-2400 CL17-17-17 @1.2V

•XMP Profile #1: DDR4-3000 CL15-17-17 @1.35V

•XMP Profile #2: DDR4-2666 CL15-17-17 @1.35V

• Power Supply: VDD = 1.2V Typical

• VDDQ = 1.2V Typical

• VPP - 2.5V Typical

• VDDSPD = 2.25V to 3.6V

• On-Die termination (ODT)

• 16 internal banks; 4 groups of 4 banks each

• Bi-Directional Differential Data Strobe

• 8 bit pre-fetch

• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)

• Height 1.661” (42.20mm)

• 該商品還沒有評論